faq
Problème
How to Maintain an Engine Cooling System?PlusRépondre
Cooling System Impurities After long time running, the cooling system may be affected by many types of dirt formed inside it. The type of dirt varies according to use and maintenance conditions o
Problème
Loader Hydraulic Torque Converter Oil Temperature AnalysisPlusRépondre
Ultra high oil temperature of a loader torque converter may cause many problems, such as oxidizing oil, reducing viscosity, decreasing transmission and lubrication functions, accelerating leak and parts abrasion, etc.
Problème
How to Prevent Ultra High Oil Temperature of a Loader Torque Converter?PlusRépondre
Choose the hydraulic transmission oil according to the temperature characteristics of the actual construction season. In addition, the oil should be oxidation resista nt, with certain viscosity.
Problème
Excavator Battery MaintenancePlusRépondre
According to operating requirements, the electrolyte level should be 10-15mm higher than pole plate.
Problème
Hydraulic Cylinder MaintenancePlusRépondre
During the maintenance of engineering vehicles, we usually detect that there are some cellular cavities inside the hydraulic cylinder or at the surface of piston, piston rod.
Problème
What Causes Cavitation?PlusRépondre
Cavitation is the formation of vapor bubbles of a liquid in a region where the pressure of the liquid falls below its vapor pressure.
Problème
How to Prevent Cavitation?PlusRépondre
Although there are many factors could cause cavitation, cavitation can also be avoided if we take effective measures to prevent it.
Problème
Holes Shouldn't Be BlockedPlusRépondre
Pump spill hole and drainage hole. The pump shaft is designed with a spill hole which can detect whether there is a leak in the pump and discharge the water leaked from the pump through it.